The unit has all possibilities for rack control, PIR sensor for door control, 2 dry contacts, temperature and humidity sensors.
Operating temperature: −40… +125°С.
RH operating range: 0 to 100%.
T accuracy: ±0.4°C in –10 to 85 °C range.
RH accuracy: ± 3% RH in 0 to 80% range.
Allows increasing the number of dry contacts connected to any Vutlan monitoring unit. Adds 32 dry contacts. Can be connected to any CAN port.
The number of dry contacts inside VT440 can be increased up to 64 with dry contacts module VT32.
Can be embedded inside VT440 (Dry Contacts extension unit). It has 32 dry contacts. Used to increase the number of dry contacts in VT440 from 32 to 64.
Ordered separately from VT440.
High-quality pressure, humidity, and temperature digital CAN sensor with a reliable price.
Smoke, humidity, and temperature sensor with high smoke sensitivity and precise temperature, humidity measurement. The detector responds to the appearance of the smoke of the low concentration.
High-quality humidity and temperature sensor with reliable price.
Increases the number of CAN sensors connected on a CAN bus chain. Supplies power for a maximum of 15 additional sensors. Needed only if the number of sensors in a CAN bus chain is greater than 12 sensors.
Increases the number of sensors connected to any monitoring unit. Adds x8 analog sensors. Connects on CAN port and allows further CAN daisy chain connection. Sensors connected to the extension unit appear in the system automatically.
Max. distance from the monitoring unit is 225 meters. Max. x8 CAN devices can be connected to a CAN bus chain.
A high-performance sensor/detector using microwave radar as a control signal source to detect objects or human movement. This product is an indoor energy-saving high-sensitivity detector.
The scanned signal can penetrate plastic, glass, ceiling, wooden door, and thin walls.
The detector also has built-in vibration and temperature sensors.
Increases the number of analog sensors connected to any Vutlan monitoring unit. Each unit connected adds 8 analog sensors. Connects on CAN port and allows further CAN daisy chain connection. Sensors connected to the extension unit appear in the system automatically.
Up to x24 VT408 units can be connected on a CAN bus line. CAN-12V-1A / CAN Power Supply has to be used to provide additional power on a CAN bus line.
VT123 / Wall mount brackets (ordered separately)
VT125t / 19” Mounting kit for x2 VT408 units (ordered separately)
