Devices

Low-cost remote environmental monitoring unit for small IT rooms. Can monitor temperature, humidity, voltage, leakage, smoke, airflow, and other parameters. It is also used as an I/O controller (e.g. door control, fans, generator, control panels, UPS, circuit breakers, and alarms). Can signal an alarm, activate a siren, send an e-mail notification, or send an SNMP Trap. Can monitor up to 100 physical sensors. Can use up to 700 different elements - notifications, triggers, timers, logic schemes, sensors, and dry contacts. Has a built-in Web interface with virtual sensors, logic schemes, different types of notifications, and control panels. There are built-in servers and agents like HTTP, HTTPS, SNMP v1, 2c, 3, SMTP, Radius, Syslog, FTP, DHCP, and OpenVPN client.

The device is used for load management and allows to switch on/off or reboot up to 4 outlets.

It has a built-in temperature sensor, can connect 2 additional sensors, 2 dry contacts, two 12V devices (for example, alarm beacons), an internal LTE modem (Ordered separately!), and USB-сam.

There are built-in servers and agents like HTTP, HTTPS, SNMP v1, 2c, 3, SMTP, Radius, Syslog, FTP, DHCP, and Watchdog. 

The unit is used for environmental monitoring (e.g. temperature, humidity, voltage, leakage, smoke, airflow). It is also used as an I/O controller (e.g. door control, fans, generator, control panels, UPS, circuit breakers, and alarms). Can connect 150 physical sensors. Can use up to 1000 elements - notifications, triggers, timers, logic schemes, sensors, and dry contacts. Has a built-in Web interface with virtual sensors, logic schemes, different types of notifications, and control panels. Has a slot for VT740 LTE slot modem (sold separately) for an ethernet connection reservation. Has two power inputs for power reservation (i.e. battery plus main power supply).

   End of Life:  31.12.2023

The Switched Power Distribution Unit (PDU) is used for load management and allows to switch on/off or reboot up to 4 outlets.

It has a built-in temperature sensor, can connect x2 additional analog sensors, x2 dry contact inputs, x2 12V controlled outputs for devices (e.g. alarm beacon or a relay contact), and a digital CAN port for connecting up to x20 sensors or extensions.

There are built-in servers and agents like HTTP, HTTPS, SNMP v1, 2c, 3, SMTP, Radius, Syslog, FTP, DHCP, and Watchdog.

LTE modem can be integrated into the system. The modem is purchased separately!

“VT825t / Remote Monitoring System” is used for environmental monitoring (e.g. temperature, humidity, voltage, leakage, smoke, airflow). It is also used as an I/O controller (e.g. door control, fans, generator, control panels, UPS, circuit breakers, and alarms). Can use up to 1000 different elements - notifications, triggers, timers, logic schemes, sensors, dry contacts. Has a built-in Web interface with virtual sensors, logic schemes, different types of notifications, and control panels.

Possible extensions:

• VT740 / LTE slot modem

• VT485m / Modbus RTU extension or VT485r / OSPDv2 reader extension

• VT-ACCU / Rechargeable reservation battery or VT-6F22 / Reservation battery 9V

Monitoring system with redundant power supply

The unit is used for environmental monitoring (e.g. temperature, humidity, voltage, leakage, smoke, airflow). It is also used as an I/O controller (e.g. door control, fans, generator, control panels, and alarms). Can use up to 1000 different elements - notifications, triggers, timers, logic schemes, sensors, dry contacts. Has a built-in Web interface with virtual sensors, logic schemes, different types of notifications, and control panels.

Has a slot for a VT740 LTE Slot modem (ordered separately!) for an ethernet connection reservation.

Order options:

VT855i  x1 230V AC power inlet

VT855ii x2 230V AC power inlets

VT855iDC x1 230V AC and x1 24-48V DC power inlets

VT855DC  x1 24-48V DC power inlet

VT855DCDC x2 24-48V DC power inlets.

Monitoring system with redundant power supply

The unit is used for environmental monitoring (e.g. temperature, humidity, voltage, leakage, smoke, airflow). It is also used as an I/O controller (e.g. door control, fans, generator, control panels, UPS, circuit breakers, and alarms). Can use up to 1000 elements - notifications, triggers, timers, logic schemes, sensors, and dry contacts. Has a built-in Web interface with virtual sensors, logic schemes, different types of notifications, and control panels. Has a slot for a VT740 LTE Slot modem (ordered separately!) for an ethernet connection reservation.

Order options:

VT855i x1 230V AC power inlet

VT855ii x2 230V AC power inlets

VT855iDC x1 230V AC and x1 24-48V DC power inlets

VT855DC  x1 24-48V DC power inlet

VT855DCDC x2 24-48V DC power inlets.ts.

The industrial DIN monitoring and control system (I/O controller) is specially designed for DIN-rail mounting racks. Includes x6 analog sensors, CAN sensor bus, Ethernet port, RS-485 / Modbus RTU, x4 digital inputs, x2 12V DC 0.25A relays, x2 digital outputs. Supports a full range of sensors and devices. 

Extension "VT770 / LTE modem" (Ordered separately!) allows SMS control, Phone dial, Internet access.