The converter of current loop 4-20mA is used for measurement of constant current on 4-20mA from different sensors and converting data into the format of IP monitoring system. The system interface allows you to assign the sensor and to introduce the function data conversion.
For use with all types of LTE modems, 5.8GHz antenna design with dual-band of 900MHz.
Increases the number of sensors connected to any monitoring unit. Adds x8 analog sensors. Connects on CAN port and allows further CAN daisy chain connection. Sensors connected to the extension unit appear in the system automatically.
Max. distance from the monitoring unit is 225 meters. Max. x8 CAN devices can be connected to a CAN bus chain.
For use with all types of LTE modems, 5.8GHz antenna design with dual-band of 900MHz.
4G LTE slot modem for Vutlan monitoring units. Allows to receive and send SMS messages. Provides Ethernet reservation over 4G LTE. Power-cycling is an embedded function. The package includes two LTE antennas.
Can be used together with VT335i
Can be used together with VT825i v2.6i, VT825ii v2.6
Can be used together with VT855i v2.6, VT855ii v2.6
Extra LTE antenna 3dBi
Increases the number of analog sensors connected to any Vutlan monitoring unit. Each unit connected adds 8 analog sensors. Connects on CAN port and allows further CAN daisy chain connection. Sensors connected to the extension unit appear in the system automatically.
Up to x24 VT408 units can be connected on a CAN bus line. CAN-12V-1A / CAN Power Supply has to be used to provide additional power on a CAN bus line.
VT123 / Wall mount brackets (ordered separately)
VT125t / 19” Mounting kit for x2 VT408 units (ordered separately)
Allows to monitor up to 32 Modbus RTU devices/meters/sensors. The maximum distance of a daisy chain is up to 1000 meters. Each metered value of a Modbus device is addressed individually using input registers and is shown by the system as virtual sensors. You can configure thresholds and icon representations for these elements.
It can be used with VT335t, VT336t, VT825t, and VT855t monitoring systems. A slot PCB board can be inserted inside the monitoring unit while the unit is in operation. Has an internal termination and by default, it is switched ON (if required can be turned off).