VT604 / Switched IP PDU

MSRP price: €599.00

  End of Life:  30.11.2023

The device is used for load management and allows to switch on/off or reboot up to 4 outlets.

It has a built-in temperature sensor, can connect 2 additional sensors, 2 dry contacts, two 12V devices (for example, alarm beacons), an internal LTE modem VT760 (Ordered separately!) , and USB-сam.

There are built-in servers and agents like HTTP, HTTPS, SNMP v1, 2c, 3, SMTP, Radius, Syslog, FTP, DHCP, Watchdog. 

Built-in extension units
warranty



4 switched outlets

VT604 has 4 switched outlets. They can be controlled individually or as a group using a web interface. Outlets can also be managed with predefined logic.




Analog sensors 2x.jpg

LEDs on the front panel

LEDs for indication of outlet status, appliance status, electronic relay status, CAN status, and errors.




Analog sensors 2x.jpg

Sensors ports

Connect sensor by a supplied RJ-11 (6P4C) cable to any "A1 - A2" port. The determination of the sensor type and connection will occur automatically.



CAN port

Connecting CAN devices on a common bus allows you to collect data from the sensors with a large area, or from a large distance and to transmit them to the network.




12V outputs for alarms

The appliance has the possibility to connect flashlights or sirens managed by a built-in electronic relay.



temperature-01.png

Temperature sensor

The temperature sensor is built-in on the board and is situated inside the enclosure. Accuracy equals +/- 1°C.



2 Dry contacts.jpg

Dry contact inputs

VT604 has 2 dry contact inputs. It can be used together with any contacts, for example with door or window contacts, circuit breakers, etc.


Extension: Internal LTE modem

VT604 has a possibility to install Internal LTE modem VT760 (Ordered separately!).  The modem is mounted and connected inside of the master unit. It is used for sending SMS notifications and receiving SMS commands. 


USB camera

USB camera (class Linux UVC Webcam which supports MPEG) can be connected to the "HS" port.


IP cameras

Using a built-in interface it is possible to add up to four IP cameras. This will allow viewing footage from surveillance cameras remotely,


USB flash drive

USB flash drive can be connected to VT604 using OTG miniUSB cable and can be used by the system for saving logs. More USB devices can be connected to one HS USB port using a USB hub.



LAN

Ethernet 10/100 Base-T port, provides a network connection.

Data sheet

Product dimensions
440 x 44.45 (1U) x 79 mm
Packaging weight
1,5 kg
Power input
1 inlet C14, 240V, 10A
Power Consumption
10 Watt
Operating temperature
Temperature : Min. -10° C - Max.+80° C
Other
Chassis grounding (M4 thread)
Recovery switch
Restart button
Mounting possibilities
19" rack mountable
Wall turnable mount (with extension)
Max. distance from the unit
225 m
Manufactured in (country)
Manufactured in Slovak Republic, E.U.
HS Code
8471 50 000
Package includes
19" mounting brackets 2pcs
Cable EU Schuko C13 0.5mm2 230V 10A
Patch cable RJ45 3m
Screws 6pcs M3 8mm
Self-adhesive rubber foot 4 pcs
Short description and connection guide
Terminal plug 2 pins 3.81mm 1pc
Terminal plug 3 pins 3.5mm 1pcs
Warranty card
Brackets (accessories)
VT112 / Rotatable mounting brackets (ordered separately)
Inputs terminals
2 inlets C14 (240V, 10A)
Analog sensor ports: x2 ports
CAN bus sensor port
Dry contacts / Digital inputs: 2 contacts (pitch 3,5mm, type IN)
Expansions (ordered separately) *
VT760 internal LTE modem
Processor *
ARM926-300 MHz / 64 MB / Linux-2.6.38
Extension protocols *
CAN
Network Interface *
CAN bus
CAN open
Ethernet 10/100 Mbit/s
Built-in sensors *
Power supply voltage sensor (1%)
Temperature sensor (Accuracy 1%)
Outputs terminals
4 outlets C13
SMA GSM
Two 12V 0,25A outputs (pitch 3,81mm, 3P)
Status Indicators *
4 orange LEDs for outlet status
Error LED
LED indication for CAN bus connection
LED indication for Power / Network connectivity
Two relay status LEDs

Download

VT604 brochure EN

Download (3.12MB)

related products

Product added to compare.