Home

Relay switchable contact. Can be used together with equipment, for example for switching ON/OFF air conditioners. Can control power for magnetic locks, bolt locks, solenoid electromagnets, siren, light source, heater and etc.

Can be connected to any monitoring system or device with 12V outputs.

Can be embedded inside VT440 (Dry Contacts extension unit). It has 32 dry contacts. Used to increase the number of dry contacts in VT440 from 32 to 64.

Ordered separately from VT440.

Converter is used together with HOS-100Q1 DC Hall current sensor by converting data into format of remote monitoring system. The system interface allows to assign a current meter and to introduce the function data conversion.

The converter is used together with the HAT-100Q1 current transducer and transferring data into a monitoring system. The system interface allows you to assign the current meter and to introduce the function data conversion.

The converter of current loop 4-20mA is used for measurement of constant current on 4-20mA from different sensors and converting data into the format of IP monitoring system. The system interface allows you to assign the sensor and to introduce the function data conversion.

DC monitor is used for the measurement of DC voltage up to 75V and converting data into the format of the IP monitoring system. The system interface allows you to assign the sensor and introduce the function data conversion.

Models:

VT410 5V, measured range 0-5V

VT410 10V, measured range 0-10V

VT410 15V, measured range 0-15V

VT410 75V, measured range 0-75V

Other customizations are possible!

The unit has all possibilities for rack control, PIR sensor for door control, 2 dry contacts, temperature and humidity sensors. 

Operating temperature: −40… +125°С. 
RH operating range: 0 to 100%.
T accuracy: ±0.4°C in  –10 to 85 °C range.
RH accuracy: ± 3% RH in  0 to 80% range.

Allows increasing the number of dry contacts connected to any Vutlan monitoring unit. Adds 32 dry contacts. Can be connected to any CAN port.

The number of dry contacts inside VT440 can be increased up to 64 with dry contacts module VT32.

The sensor is used for the measurement of 0-246V, AC. It has a very high 1% accuracy. It can be used with any Vutlan monitoring system. DIN rail 35mm mounting.

The sensor is needed for the measurement of the temperature outdoors.
Operating temperature: −50… +105°С

The sensor is needed for measurement of AC 0-246V. 

At installation on walls, windows, etc., the sensor controls vibration.