End of Life: 31.12.2023
The Switched Power Distribution Unit (PDU) is used for load management and allows to switch on/off or reboot up to 4 outlets.
It has a built-in temperature sensor, can connect x2 additional analog sensors, x2 dry contact inputs, x2 12V controlled outputs for devices (e.g. alarm beacon or a relay contact), and a digital CAN port for connecting up to x20 sensors or extensions.
There are built-in servers and agents like HTTP, HTTPS, SNMP v1, 2c, 3, SMTP, Radius, Syslog, FTP, DHCP, and Watchdog.
LTE modem can be integrated into the system. The modem is purchased separately!
End of Life: 31.12.2023
The Switched Power Distribution Unit (PDU) is used for load management and allows to switch on/off or reboot up to 4 outlets.
It has a built-in temperature sensor, can connect x2 additional analog sensors, x2 dry contact inputs, x2 12V controlled outputs for devices (e.g. alarm beacon or a relay contact), and a digital CAN port for connecting up to x20 sensors or extensions.
There are built-in servers and agents like HTTP, HTTPS, SNMP v1, 2c, 3, SMTP, Radius, Syslog, FTP, DHCP, and Watchdog.
LTE modem can be integrated into the system. The modem is purchased separately!
The sensor is needed for the measurement of temperature indoors.
The device is used for load management and allows to switch on/off or reboot up to 4 outlets.
It has a built-in temperature sensor, can connect 2 additional sensors, 2 dry contacts, two 12V devices (for example, alarm beacons), an internal LTE modem (Ordered separately!), and USB-сam.
There are built-in servers and agents like HTTP, HTTPS, SNMP v1, 2c, 3, SMTP, Radius, Syslog, FTP, DHCP, and Watchdog.
.jpg)
