VT900 / BTS monitoring unit
The unit is used for temperature, humidity, voltage, leakage, smoke, airflow, doors control in the server rooms, for monitoring of cabinets and facilities. Can use up to 1000 different elements - notifications, triggeres, timers, logics, sensors, dry contacts.
Internal LTE, GPS modem
Provides ethernet over LTE. It can work as a router. Adds time over GPS. Allows to receive and send messages. Ordered separately. Possible to order additional auxiliary and GPS antennas.
Dry Contacts Boards
VTX16 / Dry Contacts board
Supplied together with the base model. The board provides a two wire interface by adding 16 dry contact inputs.
VTX40a / Dry Contacts board
Ordered separately. Replaces default VTX16 board in bank A. Adds a 2-wire interface: 32 dry contact inputs + 8 isolated dry contact outputs.
Internal 2,5" SATA
Ordered separately. Possible to use a 2.5" HDD or SSD. Used for:
Saving logs of sensor data for analysis and evaluation;
Record digital video and audio to remote servers or internal SATA drive. Stream video directly to the operator via analog or through a web interface.
Linux based software. For example, NMS SNMP built-in client, database, SMS server;
and other possibilities...
Simple and flexible fully featured built-in web-interface for monitoring and control of the unit/sensors/devices. Includes the following panels: Dashboard, Dry contacts, Event log, Logic schemes, Cameras, Map, Users, Outlets or Relays, Graphs, System tree, and other. Supports secured connection over HTTPS.
Multi-language support. Possibility to add new languages using a translation file.
First-time wizard for configuring basic settings: Language, Time, Network, SNMP, Users.
Front panel: inputs & outputs
VT710 / LTE, GPS modem slot
VT710 / LTE modem is ordered separately. Possible to connect: LTE main, LTE auxiliary, GPS antennas. Has Mini-SIM card slot and LED modem status indicator. Used for Ethernet over LTE and SMS notifications.
Ports for analog sensors
Connect sensor by a supplied RJ-11 (6P4C) cable to any sensor port "A1 .. A8". The determination of the sensor type and connection will occur automatically. Possible to connect up to 100 analog sensors using "VT408 / Sensor extension unit"
E1-E2 for 12V 0.25A outputs; R1-R2 for relays; STATUS indicates appliance status; CAN indicate CAN bus status; HDD indicates SATA status; ERROR indicates error and traffic.
MicroSD card slot
The monitoring unit uses SD-card to record changes in logs, sensor data, configuration elements. The firmware updates can also be done using the SD card.
USB0 is a type miniAB USB port 2.0. Can connect Modbus sensors using VT485; USB camera; or connect a PC for restoring an appliance, or connect USB flash for saving logs.
Back panel: inputs & outputs
Used for connection of an access reader or accurate 1-Wire sensors.
Analog video & audio input and output (connector type TRRC). DC 12V 0.25A power supply output for an analog camera. Requires SATA to be installed inside the unit.
Two 12V 0.25A outputs
Two outputs, DC 12V 0.25A each with LED indicators in the front panel. Can connect, for example, light tower, magnetic/bolt lock, electric latch, siren. Can be ordered:
Two loads (latching relays with LED indicators on the front panel). Used to control the large flow of electrical current with a smaller flow of current. Examples include conditioners, lights.
Dry contact inputs
The unit has x16 dry contact inputs (two-wire interface). Used for contacts of windows, doors, fire/burglar alarms, power systems, exit/push buttons. VTX16 is supplied by default. It can be replaced by the "VTX40a / Dry contacts board".
Ordered separately. Replaces default VTX16 board in bank A. Adds a 2-wire interface: x32 dry contact inputs + x8 isolated dry contact outputs.
Save sensor and system data to USB Flash drive, FTP, Mail, Syslog server, or using SATA. Possible to specify saved sensors, a lifetime of files, and enable detailed Logs. Configuration...
Provide centralized control access to multiple monitoring devices on a network. Also needed when an individual user configuration on each monitoring device is too time-consuming. Access via a Radius server
Configurable logic schemes
Logic schemes are used to specify automatic actions to events that occur in the system. Conditions “IF” are combined using “AND” & “OR” and executed using “THEN”. Adding logic schemes
Detailed graphs and data tables for one or more sensors using a multi-plot graph.
Integrates with network management systems via SNMP v1, SNMP v2c, and encrypted SNMP v3. API overview
Notifications are intended to inform the user about events occurring in the monitoring system. Vutlan systems support notifications by E-mail, SMS, SMS Gate, Web-to-SMS. Physical notifications are possible using alarm beacons, light towers, sirens. Environmental control
Full range of sensors & outputs
Vutlan provides full range of sensors and control devices. For example Temperature, Humidity, Vibration, Leakage detection, Water & Fuel level, AC/DC measurement, Airflow, Smoke detection, Motion, Access, Relays, Dry Contacts, Outlets, Cameras, Dry Contacts and other. Access via a Radius server
Virtual sensors & elements
Possible to add 9 virtual elements: Group, E-mail (message), SNMP trap, SMS, Timer, Trigger, PING, SNMP Get, IP Cam. Read more
User access & permissions
Using “view” and “write” rights, user access can be restricted to the subsystems of the device using groups of access permission. User access can also be restricted to a specific group of sensors. Read more
Infrastructure monitoring program
Achieve instant awareness of IT infrastructure problems, so downtime doesn’t adversely affect your business. Complete monitoring and alerting for multiple Vutlan devices, servers, switches, applications, and services. It is preloaded with NMS Nagios plugins to check for Vutlan master modules and is provided as a virtual machine image in an open format ova.
Monitor your entire IT infrastructure;
Spot problems before they occur;
Know immediately when problems arise;
Share availability data with stakeholders;
Detect security breaches;
Plan and budget for IT upgrades;
Reduce downtime and business losses;
- Product dimensions
- 1U Rack mount, 440 mm
Depth 110 mm
- Packaging weight
- 1.8 kg
- Power input
- 1 inlet C14, 240V, 10A
- Operating temperature
- Temperature : Min. -10° C - Max.+80° C
- Chassis grounding (M4 thread)
- Mounting possibilities
- 19" rack mountable
- Max. distance from the unit
- 225 m
- Manufactured in (country)
- Manufactured in Slovak Republic, E.U.
- HS Code
- 8471 50 000
- Package includes
- 19" mounting brackets 2pcs
Cable EU Schuko C13 0.5mm2 230V 10A
Patch cable RJ-45 1m
Screws 6pcs M3 8mm
Self-adhesive rubber foot 4 pcs
Short description and connection guide
Terminal plug 3 pins 3.81mm 1pcs
- Device management
- RADIUS, LTE
- Brackets (accessories)
- VT112 / Rotatable mounting brackets (ordered separately)
- Inputs terminals
- AV IN (Video Audio), USB
- Expansions (ordered separately) *
- VT40 / x32 Dry contact inputs, x8 isolated dry contact outputs
- Processor *
- Dual-core ARM Cortex-A7 / 1GHz / 1GB / Debian Linux
- Extension protocols *
- Network Interface *
Ethernet 10/100 Mbit/s
- Built-in sensors *
- Temperature sensor (Accuracy 1%)
- Outputs terminals
- Two latching relays, DC12V power source for analog camera
- Status Indicators *
- Error LED
LED indication for CAN bus connection
LED indication for Power / Network connectivity
Two relay status LEDs
No customer reviews for the moment.