ESCT-T24 / Current transformers

MSRP price: €0.00

• Split-core
• Safe operation
• Mini in size
• Very easy to mounting
• Wide inner window
• Wide range of size for all existing installation
• Primary current from 5A to 600A
• 5A or 1A secondary output 

ESCT transformers series of split-core current transformers are designed for fast and easy installation. The split-core design permits non-contact current measurements through magnetic field induction without requiring that the primary wire be taken offline and disconnected for CT installation. This method permits a safer easy and portable current measurement. An internal precision burden resistor across the secondary winding of the CT provides a safe low voltage output and permits the safe opening of the secondary circuit.

Specifications

Frequency

    50-60Hz

Rated current

    5A to 600A loads

Rated output 

    5A or 1A ( AC)

Accuracy

    ±1% from 20% to 120% of rated current

Phase angle 

    less than 2 degrees at 50% of rated current

Insulation voltage

    600Vac

Dielectric strength

    2.5KV/ 1mA/1min

Operating temperature

    -15℃ to 60℃

Operating humidity

    ＜ 85%

Case material

    PC/UL94-V0

Bobbin

    PBT

Core

    Permalloy

Internal structure

    Epoxy

Leads

    UL 1015, Twisted Pair, 22AWG

Application

*Current measurement, monitoring and protection for electrical wiring and equipment

*Current and power measurement for electric motors, lighting, air compressor, heating, and ventilation system, air-conditioning equipment and automation.

*Current, power, and energy monitoring device

*Relay protection device

Type Selection

  Model
 		 Rated input  Rated output    Wire diameter  Accuracy
  ESCT-T24-100/5  100A  5A  24.5mm  0.5/1/3.0
  ESCT-T24-150/5  150A  5A  24.5mm  0.5/1/3.0
  ESCT-T24-200/5  200A  5A  24.5mm  0.5/1/3.0
  ESCT-T24-250/5  250A  5A  24.5mm  0.5/1/3.0
  ESCT-T24-250/5  300A  5A  24.5mm  0.5/1/3.0

No customer reviews for the moment.

Download

ESCT current transformers

ESCT current transformers

Download (1.81M)

related products

SDM630MCT / three-phase...
Price €235.00
The SDM630MCT is a three-phase multifunction DIN-rail meter. It can measure and display the characteristic of 1p2w, 3p3w, and 3p4w supplies, including voltage, current, power, active and reactive energy imported or exported. Energy is measured in terms of kWh, kVarh. Max demand current can be measured over preset periods of up to 60 minutes. In order to measure energy, the unit requires voltage and current inputs in addition to the supply required to power the meter. The required current inputs are obtained via current transformers. It is easy to connect to any Vutlan monitoring unit via RS-485/Modbus RTU. And the configuration is password protected.
Product added to compare.