The SDM630MCT is a three-phase multifunction DIN-rail meter. It can measure and display the characteristic of 1p2w, 3p3w, and 3p4w supplies, including voltage, current, power, active and reactive energy imported or exported. Energy is measured in terms of kWh, kVarh. Max demand current can be measured over preset periods of up to 60 minutes. In order to measure energy, the unit requires voltage and current inputs in addition to the supply required to power the meter. The required current inputs are obtained via current transformers. It is easy to connect to any Vutlan monitoring unit via RS-485/Modbus RTU. And the configuration is password protected.
The SDM220 is an advanced digital single phase multifunction energy meter, which measures up to 100A direct load. The unit measures active energy, reactive energy, current, voltage, power, power factor, frequency, demand, etc. Bi-directional measurement makes this unit an ideal choice for Solar PV measurement. Communication parameters are password protected in a setup mode. Users can check data and set up the meter via the buttons on the front panel. Shunt is purchased separately.
The unit measures and displays the characteristics of voltage, current, power, active energy, imported, or exported. Energy is measured in terms of kWh. This meter work with a wide range of DC shunts up to 2000A. and it supports both positive and negative type connection modes, improving the wiring flexibility of the shunt. Easy to connect to any Vutlan monitoring system. The configuration is password protected. Used in the EV Charging Piles, Solar Photovoltaics, and New Energy Storage and other energy monitoring systems. Requires a Shunt
. Shunt is ordered separately.
Product added to compare.